The Best Regulator Panel For Your Beer System

Installing a regulator panel for your draft beer system is an important task. That will help ensure the safety and efficient operation of your beer system. A pre-assembled regulator panel makes the installation process much easier and can be installed in a walk-in cooler wall with ease.

The metal panel features an integrated stainless steel wall bracket. That acts as a reliable transition between a keg jumper hose and trunkline. Control the flow of gas to kegs in your system. John Guest fittings create quick connections to your trunkline in the cooler. So you can set up your beer system and get started pouring delicious cold draft beer!A regulator panel is a piece of equipment used to control the flow of gas to kegs in a draft beer system. The panel helps to ensure the safety and efficient operation of the system by providing a quick and easy way to connect the trunkline to the kegs. The panel also includes a shut-off valve used to stop the flow of beer in jumper lines if needed.

What is a Regulator Panel?

If you are looking for a reliable and easy-to-use regulator panel for your draft beer system. Then the Regulator Panel from Micromatic is a great option. The panel is made from durable stainless steel and features an integrated wall bracket that makes installation quick and easy.

The Regulator Pro-Max Panel from Micromatic is an essential piece of equipment for any draft beer system. And will help ensure that your system is operating and efficiently.

Why it's Important to Have A Regulator Panel For Your Beer System

A Regulator Panel is important to have in your draft beer system because it helps to control the flow of gas to the kegs. The panel makes it quick and easy to connect the trunkline to the kegs. And it also includes a shut-off valve that can be used to stop the flow of beer if needed. Regulator Panels are essential pieces of equipment for any draft beer system, and they will help ensure that your system is running correctly.

The Benefits of Having a Regulator Panel

Regulate the flow of gas to your beer kegs

Each brand will have its own secondary regulator that can be adjusted according to the beer carbonation of the draft beer being served. Precise gas pressure was delivered to the beer keg.

Shut off beer with a beer FOB when the Keg crashes

After your beer is cashed. Instead of filling the beer system with beer foam which will cause loss to the owner. Beer FOBs keep the lines packed with beer and you'll only have to change the jumper line which is 8' in the beer cooler. This will lead to cost savings for the owner.

Drain Line already set up with Beer FOBs

When you have FOBs you will need to purge the FOB when connecting to a new keg. The FOBs on these panels come with the drain lines already attached. So whichever way you decide to send the drain line in the walk-in cooler you'll be set up saving install time.

Air and Beer Line Jumpers Already Hooked Up

The other nice thing about these panels is they come with an 8' Jumper line on the beer line or product line, and 8' on your airline. On the product line, there will be wing nuts also attached. You will only need a beer washer to add and you'll be able to attach your stainless steel coupler. On the airline side, you will need a 15.7 or 16.2 Oetiker clamp to secure the airline to the coupler.

Save Time With Installation

Using these regulator panels will help the efficiency of your beer system. But more importantly, will cut down the time of installing a beer system. If you contract this work out you could save thousands in labor costs by having these panels ready vs building these panels on site and installing them.

Keep your system running smoothly and efficiently

When these regulator panels are set up properly your pour costs will be lowered. Secondaries will regulate the right pressure on your beer keg. When the keg crashes the FOB will keep the beer system packed with beer while you change new kegs. Not interfering with liquid beer in your beer trunkline saving the customer/user money.

Types of Regulator Panels For Walk-In Coolers

1 Product 

This is a 1 product regulator with 1 FOB

2 Product

This is a 2 product regulator with 2 FOB'S

4 Product

This is a 4 product regulator with 4 FOB'SEach of these Panels will come will a panel mount and all the accessories describe above. Secondary Regulator, Beer FOB, Jumper Lines for air and product at 8', and lastly the drain lines for the FOB's.

Conclusion

As you can see, having a regulator panel is important for your beer system. Not only does it keep your system running smoothly and efficiently, but it also saves you time with installation. There are different types of regulator panels available, so be sure to choose the one that best meets your needs. The one I use most often is the Micromatic made regulator panel. They are a little more expensive but will pay for themselves over and over again in the long run.

If you have any questions about regulator panels or any other aspect of beer systems, please don’t hesitate to contact us. We would be happy to help!