High Quality Low Profile Keg Coupler For Kegerators

Are you looking for a perfect keg tapping solution to dispense beer from your kegerator? Finding it difficult to tap a keg with a tall coupler? Vertical space above the sankey keg at a minimum? Look no further than the low profile coupler. This handy device is designed to fit snugly into any standard kegerator, allowing you to pour delicious draft beer without taking up too much space. With its slim design and high 304 quality construction. The low profile keg coupler is ideal for those who want an elegant solution for their home bar or restaurant. This NSF approved keg coupler is easy to install, maintain, and is designed to work in tight spaces. So you can enjoy your favorite brews with ease! Whether you're just getting started or already have a well-stocked cooler of craft beers.

What Exactly is a Low Profile Coupler?

This keg coupler short design is a specialized device designed to fit snugly into a sankey keg inside a standard kegerator and dispense draft beer with ease. The coupler is constructed with high-grade 304 stainless steel, with a sanitary stainless steel probe making it both durable and stylish.This coupler features a gas hose inlet, and gas input barb to fit 5/16 air gas line for the gas supply, and outlet beer output to accommodate 3/16 I.D. line. The beer outlet barb can be changed if need be for a different sized beer line.The Low profile design excels in kegerators with low clearance. Use with all products: beer, wine, cider. This slim design allows for easy installation and maintenance while taking up minimal space.A pressure relief valve to remove excess pressure also comes with this coupler. This keg valve is on the side of the coupler to relieve over pressurized gas in beer system sankey kegs. To operate simply pull the ring and hold for a few seconds to adjust the head pressure.

Click on the picture to buy

How to Install This Coupler

Installing a low profile keg coupler is surprisingly easy and can be done with a few easy steps. First, make sure you have the right coupler for your keg – not all are universal. More than likely you'll want a D-style low profile keg coupler. Once you’re set up with the right piece, simply attach it to the keg by lining up the tabs with the keg coupler. Turn it clockwise until the coupler stops. Finally, push down on the keg coupler, and turn a quarter turn. This engages the coupler and you'll be ready to pour. With these easy steps you'll know how to tap a keg with a low profile keg coupler.

For information on what's all needed for a kegerator kit so you can dispense beer check this out.

How to Maintain a Keg Coupler

Maintaining a keg coupler is relatively simple when done routinely and correctly. It is important to make sure there is no debris or foreign materials stuck in the coupler that could disrupt its performance and cause problems around the beer keg. To maintain optimal performance of the keg coupler, it should be thoroughly cleaned every 2 weeks with a cleaning solution. A soft brush can be used to free any sticky substances on the outside of the coupler such as beer stones or dried yeast. Taking apart, checking gaskets and lubricating the internal components of the keg coupler every 4 months will ensure long-term efficiency and prevent potential issues in the future. Following these maintenance tips will guarantee your keg coupler keeps working like new.

Where to Buy One From

You can purchase them online but I would recommend it from Micromatic.com. They have a variety of sizes and styles, so you can find the perfect fit for your kegerator. Plus, they offer competitive prices on all their products for customers. They also provide an excellent customer service team to answer any questions or concerns you may have about installing and using your keg coupler. So if you’re looking for a reliable and affordable low profile keg coupler, look no further than Micromatic.com.

Summary

The beer coupler is a specialized device designed to fit snugly into any standard kegerator and dispense draft beer with ease. Constructed with high-grade 304 stainless steel for durability and style, this slim design allows for easy installation and maintenance while taking up minimal space. Customers installing the keg coupler will find it easy and can be done in a few steps. It should also be maintained regularly to ensure optimal performance, such as cleaning every 2 weeks and taking apart the internal components every 4 months. If you are looking for a quality low profile keg coupler. That gives you extra clearance space challenged places Micromatic.com is an excellent option with competitive prices and great customer service!If you have any further questions you can reach out to me here. I also encourage you to check out my blog with other helpful dispensing information.

Cheers!