The Eliminator… co2 Automatic Change Over System For Your Bar
The Benefits of a Seamless Co2 Gas Supply For Your Bar
The Eliminator Co2 Automatic Gas Change Over is a cost-effective, automatic cylinder switching unit that works with any beverage gas cylinder up to 3000 psi. The Eliminator provides a seamless application switch between cylinders. Ensuring a continuous supply of beverage gas is especially important during peak periods. The Eliminator is a completelyautomatic gas cylinder changeoversystem that is nonelectric, foolproof, and designed for easy installation
What is The Eliminator and What Are The Benefits
The Eliminator is an automatic changeover beverage cylinder switching unit. That works with any beverage gas cylinder in the beverage industry. This unit will automatically change to the full tank, so you never have to worry about running out of CO2. The installation is easy and can be done in just a few minutes. Simply mount the ELIMINATOR automatic changeover valve on the wall with its outlet about 10” above the gas cylinders you are using.If you are using a TAP RITE brand pressure regulator, you will need to add a 3/4” spacer between the automatic gas cylinder changeover and wall for adequate clearance. With the CO2 Tank, you can enjoy delicious, refreshing carbonated beverages anytime, anywhere.
Automatic Changeover From an Empty Cylinder
The Eliminator is a great way to make sure you always have plenty of CO2 or nitrogen on hand for your bar. It works by automatically switching between two CO2 gas cylinders or nitrogen cylinders. This means that you never have to worry about running out of gas, even during peak periods.The installation is simple and can be done in just a few minutes. Saves time by eliminating the need for bar staff to manually switch out CO2 cylinders, freeing them up to serve customers in a restaurant, brewery or taphouse.It also saves money by ensuring a continuous supply of CO2, eliminating any downtime or loss of product due to gas shortages.Shop auto changeover here.
Installation of the Eliminator
Before installing the Eliminator automatic changeover system, make sure there are no leaks or damage on any of its components. Sealant washers should be used to connect all connections and ensure a tight seal when connecting hoses with 3/8-inch connection openings for federal AC standards; 5/16-inch ID barrels can also work but may require an extra 1 ⅜” between them depending upon what type of regulator you use (Taprite branded). For this same reason, it's important not to over-tighten the connections as it may damage the regulator. Mount the Eliminator valve on the wall with its outlet about 10” above the gas cylinders you are using. Use 3 to 5 long screws for mounting the valve body to the wall. If you're using a Taprite regulator.You'll need to add a three-quarter-inch spacer between the eliminator for adequate clearance.Next, connect your pressure regulators inlet to the eliminator's outlet. Then connect the eliminators inlet to The cylinder that will be used. And before you install the eliminator remember to make sure your hoses and connections are free from damage and potential leak issues.The illuminator valve will automatically switch to the second cylinder when the pressure in the right cylinder falls below 185 psi. Now replace the empty cylinders on the right with full cylinders. Remember to turn on the cylinders when replaced. And the cycle continues switching between the empty gas cylinders on the left and the right. Your elimination gas cylinder changeover system is not only reliable and gives you the ability to keep operations going without interruption.
The Importance of a Seamless Gas Supply For Your Bar
A seamless gas supply is important for your bar because it ensures a continuous flow of CO2, which is necessary for making carbonated beverages. The Eliminator is an easy way to make sure you always have plenty of CO2 on hand, and it can be installed in just a few minutes. This eliminates the need for bar staff to manually switch out CO2 cylinders. And keeps your business operating efficiently without any hang-ups. Providing exceptional service.Get auto changeover here
Comparison of the Eliminator to other automatic gas change-over units on the market
The Eliminator is a great way to make sure you always have plenty of CO2 on hand for your bar. It works by automatically switching between two CO2 gas cylinders. This means that you never have to worry about running out of gas, even during peak periods.It can be customized for 2, 4, 6 or 8 cylinders and is the most affordable automatic gas switchover unit on the market. It also requires little maintenance and can easily be installed with your existing beverage gas regulator.Compared to other automatic change-over units, it has a smaller footprint and takes up less space in your bar area. And its durable construction means that it will last for years to come.
Final thoughts on the Eliminator
The Eliminator is the most affordable automatic Co2 gas changeover on the market and requires no maintenance once installed. It ensures a continuous supply of CO2, allowing you to serve carbonated beverages without interruption during peak periods. The easy installation and hands-free operation also make it the go-to co2 gas changeover system. The Eliminator is a simple yet effective solution for ensuring you always have plenty of CO2 on hand. It can be installed in just minutes, eliminating the need to switch out cylinders manually!Get your auto changeover here!!!For more information on draft beer dispensing and equipment visit my blog here. Till next time.Cheers!